Information; Level Map - GRASS VALLEY NV9640 User Manual

Operation
Operating Concepts
MD Mode
In MD mode, turning hold mode on allows you to select more than one destination button at a
time. When you select a source, the source applies to all selected (high-tally) destinations. If hold
is still on when you press 'Take' , the selected destinations remain selected and the display
reflects the selected destinations. The buttons for the selected destinations remain high-tally.
Without hold enabled, the panel has no destinations selected after an MD take and the buttons
for the selected destinations go low-tally.
When hold is active, all selected MD destinations get the source you selected most recently (in
case you change your mind and selected another source).
X-Y Mode
In X-Y mode, the hold button causes breakaway levels to be retained after a take. The levels you
selected (and deselected) remain lit (or unlit) as they were before the take.

Information

The 'Information' button presents auxiliary information on the alphanumeric display. Such infor-
mation might be level-mapped sources.
The default button text is "Info" but the button can have any legend.

Level Map

The 'Level Map' button cross-connects levels (typically in the same physical router). The function
is typically used to shuffle audio channels, for example, to connect AES1/2 to AES3/4.
Follow these steps to create a level mapping:
1 Select a source. Here, the source is CAM-14:
2 Press 'Level Map' . The button goes bright and the display tells you to "Select Source Level. "
58
Preset Status
X – Y X – Y –––––––– –––––––– –––––––– ––––––––
Dest Dest CAM–14 CAM–14 CAM––1 CAM––1
VTR––1 VTR––1 CAM–14 CAM–14 CAM––1 CAM––1
CAM–14 CAM–14 CAM––1 CAM––1
CAM–14 CAM–14 CAM––1 CAM––1
CAM–14 CAM–14 CAM––1 CAM––1
–––––––– –––––––– –––––––– ––––––––
Page Page 1 1
Preset Status
X – Y X – Y –––––––– –––––––– –––––––– ––––––––
Dest Dest CAM–14 CAM–14 CAM––1 CAM––1
VTR––1 VTR––1 CAM–14 CAM–14 CAM––1 CAM––1
Select Select CAM–14 CAM–14 CAM––1 CAM––1
Source Source CAM–14 CAM–14 CAM––1 CAM––1
Level. Level. CAM–14 CAM–14 CAM––1 CAM––1
–––––––– –––––––– –––––––– ––––––––
Page Page 1 1
Level/Dest
HD HD
SD SD
AUDIO 1 AUDIO 1
AUDIO 2 AUDIO 2
AUDIO 3 AUDIO 3
AUDIO 4 AUDIO 4
TIMECODE TIMECODE
Level/Dest
HD HD
SD SD
AUDIO 1 AUDIO 1
AUDIO 2 AUDIO 2
AUDIO 3 AUDIO 3
AUDIO 4 AUDIO 4
TIMECODE TIMECODE