Table of Contents
Advertisement
Panel Options
The panel options section, at the right of the configuration page, has two parts: drop-down
menus and checkbox options. These are the drop-down menus:
The note in magenta text tells you how to scroll multi-destination pages (in the alphanumeric
display) during configuration. Your configuration should have at least one 'Page Up' and 'Page
Down' button if you wish to do this. A double-click is required. It is assumed that the configura-
tion loaded in the NV9640 and available to operators will have the same 'Page Up' and 'Page
Down' buttons.
The minimum number of destinations for multi-destination mode is 8. If you have the minimum,
there is no need for scrolling during configuration. You may leave some (or all) MD destinations
undefined. Scrolling is disabled unless you have chosen more than 8 destinations as the multi-
destination device limit.
These are its drop-down menu options:
Default Mode
Release Mode
Default
Destination
Preset Monitor
Status Monitor
Starts the panel in XY mode after a reset. See
X-Y Mode
Multi-Dest Mode Starts the panel in multi-destination mode after a reset.
Normal Release
This panel can release "locks" and "protects" set by the designated
user (at this panel or any other panel).
Force Release
This panel can release locks and protects set by any user.
None
After a reset, the panel displays no destination device. (This is not
recommended.)
‹device›
The Panel uses the specified device as the destination after a reset.
(The 'Default State' button also returns the panel to this destina-
tion.)
None
The preset source video is not sent to a monitor.
‹device›
The preset source video for the selected destination appears on
the specified monitor (device).
None
The current source video is not sent to a monitor.
‹device›
The current source video for the selected destination appears on
the specified monitor (device).
NV9640
User's Guide
Defaults
on page 83.
19
Advertisement
Table of Contents
