How To Configure Md Destinations - GRASS VALLEY NV9640 User Manual

The limit to the number of MD devices is controlled by a panel option. If the limit is 64, for
example, the display can scroll through 8 pages of 8 rows, regardless of whether these rows
have been assigned a destination.
Initially the list of MD destinations is empty and all you will see in the display are numbered
blank lines. After you assign MD destinations to the numbered lines, the destinations'
mnemonics appears on those lines.

How to Configure MD Destinations

Follow these guidelines.
1 Click any line in the display. (A single click is all that is required.) A dialog appears. This is the
multi-destination entry editor:
On the left is a list of all destinations defined in the NV9000 system. On the right is a table of
the MD destinations you are defining. The number of rows in this table is equal to the maxi-
mum number of MD destinations your configuration allows.
To define an MD destination, select a destination on the left and copy it, using either the
'Append' button, the 'Insert' button, or the 'Replace' button, to the right.
The 'Append' button appends the selected destination to the end of your set of MD destina-
tions.
The 'Insert' button places the selected destination immediately above whatever MD destina-
tion you have highlighted on the right.
The 'Replace' button replaces whatever MD destination you have highlighted on the
right.with the selected destination from the left.
The 'Remove' button removes highlighted MD destinations from the right.
At the bottom left, there is a scroll box in which you can adjust the maximum number of MD
destinations. (The page size is indicated as fixed at 8 entries. You cannot change the page
size.)
NV9640
User's Guide
39