GRASS VALLEY NV9640 User Manual page 24

Configuration
Adding a Panel to an NV9000 Configuration
After launching NV9000-SE Utilities, choose 'Control Panels' from the Configuration pane in the
navigation area. The 'Control Panels' configuration page appears:
Click 'Add Control Panel' at the bottom of the configuration page. The 'Add Control Panel' page
appears:
Choose "NV9640" from the 'Type' field. In the ID field, enter the panel ID you assigned to the
panel while it was in setup mode. Give a name to the panel in the name field and select a user.
When you are creating a panel configuration you have 3 options. These options are presented in
the 'Configuration Options' area:
1 Make a copy of an existing configuration file, giving it a new file name.
2 Use an existing configuration file. (This allows several panels to share a single configuration.)
3 Create an entirely new configuration file.
In the first and third cases, you will create a new configuration file whose name you designate.
The file extension for an NV9640 configuration file is
14
.640
. Click 'Next' or 'Finish' to proceed.