Table of Contents
Advertisement
SC111 Chassis Manual
C-5 Front Connector and Pin Definitions
1. Backplane Main Power Connectors
The 4-pin connectors designated JP10 pro-
vides power to the backplane. See the table
on the right for pin definitions.
2. - 5. SAS Ports
The SAS ports are used to connect the SAS
drive cables. The four ports are designated #0
- #3. Each port is also compatible with SATA
drives.
6. Sideband Header
The sideband header is designated JP51. For
SAS-2 to work properly, you must connect an
8-pin sideband cable. See the table to the right
for pin definitions.
7. I
2
C Connectors
The I
2
C Connector, designated JP44, is used
to monitor HDD activity and status. See the
table on the right for pin definitions.
4-Pin Connector
Pin# Definition
1
2 and 3
4
Sideband Headers
Pin # Definition
2
SDIN/
Backplane
Addressing
(SB5)
4
SDOUT/I
Reset
(SB4)
6
GND (SB3)
8
Backplane
ID (SB7)
10
No Connec-
tion
I
2
C Connector
Pin Definitions
Pin# Definition
1
2
3
4
C-4
Backplane
Main Power
(JP10)
+12V
Ground
+5V
(JP51)
Pin # Definition
1
Controller
ID (SB6)
2
C
3
GND (SB2)
5
SDA (SB1)
7
SCL (SB0)
9
No Connec-
tion
(JP44)
Data
Ground
Clock
No Connection
Advertisement
Table of Contents
