Table of Contents
Advertisement
SC111 Chassis Manual
6.
If replacing an existing DVD-ROM drive or USB com port, remove the drive
screws (F), place the replacement drive into the drive tray, and replace the
drive tray mounting plates (G), using the drive screws.
7.
If installing a USB com port, gently slide the assembled drive, drive tray and
drive tray mounting plates into the chassis.
If installing a DVD-ROM drive, gently slide the assembled drive, drive tray,
drive tray mounting plates, and the DVD-ROM drive adapter board into the
chassis and secure
8.
Reattach the drive tray to the chassis by replacing the mini-bezel lock screw,
and tightening it from inside the chassis.
9.
Reconnect the data and power cables.
10.
Replace the chassis cover, return the server to the rack if necessary, and
power up the system.
F
1
Figure 5-5: DVD and USB Com Port Installation
G
1
5-6
F
1
G
1
G
1
Advertisement
Table of Contents
