Supero SC111 Series User Manual page 51

Extending Power Cables
Although Super Micro chassis are designed with to be efficient and cost-effective,
some compatible motherboards have power connectors located in different areas.
To use these motherboards you may have to extend the power cables to the mother
boards. To do this, use the following chart as a guide.
Number of Pins
24 pin
20 pin
8 pin
4 pin
Front Panel to the Motherboard
The SC111 chassis includes a cable to connect the chassis front panel to the
motherboard. If your motherboard uses a different connector, use the following list
to find a compatible cable.
Front Panel to Motherboard Cable (Ribbon Cable)
Number of Pins
(Front Panel)
16 pin
16 pin
20 pin
16 pin
20 pin
* Split cables: Use these cables if your motherboard has different pin defini-
tions than a Supmicro motherboard.
Power Cable Extenders
Cable Part #
CBL - 0042
CBL - 0059
CBL - 0062
CBL - 0060
Number of Pins
(Motherboard)
16 pin
20 pin
20 pin
Split*
Split*
A-3
Appendix A: Chassis Cables
Length
7.9"(20 CM)
7.9"(20 CM)
7.9"(20 CM)
7.9"(20 CM)
Cable Part #
CBL - 0049
CBL - 0048
CBL - 0047
CBL - 0068
CBL - 0067