Table of Contents
Advertisement
SC111 Chassis Manual
6
6
Installing an Expansion Card
1.
Confirm that you have the correct riser card for your chassis model and that
the add-on card includes a standard bracket.
2.
Remove the chassis cover.
3.
Install the riser card into the riser card bracket.
4.
Insert the riser card card into the appropriate slot on the motherboard. Se-
cure the riser card bracket to the chassis using screws as illustrated.
5.
Choose the I/O panel slot in which to place the add-on card. On that slot,
open the I/O panel lever and slide the I/O panel sideways. From inside the
chassis, remove the I/O panel.
6.
Slide the add-on card into the riser card and attach the add-on card bracket
in place of the I/O panel bracket.
7.
Secure the add-on card by closing the I/O panel lever.
8.
If additional support for the add-on card is required, locate the add-on card
support arm on the floor of the chassis and rotate the add-on card support
arm inward to support the edge of the add-on card.
9.
Connect cables to the add-on card if necessary.
4
1
8
6
Figure 5-9: Chassis with a Riser Card
5-10
Advertisement
Table of Contents
