More Options; Caring For Your Device - ResMed AirStart 10 APAP User Manual

More options

Your care provider may have given you access to personalize a few more options.
Pressure Relief
Mask
Run Warmup

Caring for your device

It is important that you regularly clean your AirStart 10 device to make sure you receive optimal
therapy. The following sections will help you with disassembling, cleaning, checking and
reassembling your device.
WARNING
Regularly clean your tubing assembly, humidifier and mask to receive optimal therapy and to
prevent the growth of germs that can adversely affect your health.
Disassembling
1. Hold the humidifier at the top and bottom, press it gently and pull it away from the device.
2. Open the humidifier and discard any remaining water.
3. Hold the cuff of the air tubing and gently pull it away from the device.
4. Hold both the cuff of the air tubing and the swivel of the mask, then gently pull apart.
When Pressure Relief is enabled, you may find it easier to breathe out. This
can help you get used to therapy.
This option shows your mask type setting. If you use more than one type of
mask, adjust this setting when switching between masks.
This option allows you to pre-heat the water before starting therapy, so that
the air is not cold or dry at the beginning of therapy.
English 7