Replace The Real-Time Clock (Rtc) Battery - Emerson RXi2-BP Hardware Reference Manual

Hide thumbs Also See for RXi2-BP:

Table of Contents

RXi2-BP Hardware Reference Manual

GFK-3187B

3. Please be aware that all six gap pads are in position (Figure 8). They are a part of thermal

management, and important for the system's lifetime. The battery has a thicker gap pad.

Do not mix!

Figure 8: Position of Six Gap Pads

4. Once the desired maintenance or replacement task is completed, attach the cover again,

double-check that the lid is correctly placed. Tighten the four screws with 0.6 Nm.

5.2

Replace the Real-Time Clock (RTC) battery

WARNING

There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or

equivalent to Rayovac BR2032 or CR2032. Dispose of used batteries according to Emerson

provided instructions and applicable local regulations.

Battery can only be exchanged by skilled person.

CAUTION

Static-sensitive Devices: Handle only at static-safe work stations.

Installation and Replacement Procedures

Section 5

November 2020

Table of Contents