Table of Contents
Advertisement
RXi2-BP Hardware Reference Manual
GFK-3187B
1.1
Document History
Rev
B
A
1.2
Capability and Compatibility
The mC10L19 COM Express module is a fully x86 compatible single board computer module,
containing many functions in a very small form-factor. It is based on the PICMG COM Express
Module Base Specification V3.0 Type 10. (Refer to the documentation located at www.picmg.org.)
The mC10L19 uses the AMD family 17h models 10h-1fh (V1000 and R1000) Ryzen Core Processor.
The CEC10 COM Express carrier board is also compliant with the PICMG COM Express Module Base
Specification R3.0 Type 10 (refer to the documentation located at http://www.picmg.org).
The RXi2-BP power supply module provides a voltage input of nominal 24 V DC (± 25%) and
supports under and overvoltage supervisory, and protection against reverse polarity.
1.3
Software Requirements
•
•
1.4
Features
RXi2-BP IPC module features are as follows:
•
•
•
•
•
•
•
•
•
•
•
•
Introduction
Date
Description
November
•
Updates to product label
2020
•
Updates to Regulations and Certifications
Oct 2020
Initial revision
Microsoft® Windows® 10 Professional 64-Bit IoT 2019 LTSC
Linux® Kernel 5.4
AMD Ryzen V1000
4c/8t V1000, TDP 12 - 25W, L2 2MB, L3 4MB, 8 GPU CU, Industrial-temp,
-
4 to 16GB DDR4-2400 ECC RAM (single rank)
AMD Ryzen R1000
2c/4t R1000, TDP 8 - 10W, L2 1MB, L3 2MB, 3 GPU CU,
-
4 to 16GB DDR4-2400 ECC RAM (single rank)
1x Display Port V1.4
2x USB 2.0
2x USB3.2 Gen1
4x Gig Ethernet ports (1 Realtek RTL8111 controller and 3 Intel i210IT controllers,
supporting TimeSYNC IEEE1588 and 802.1AS)
Mini PCIe slot (half size) as option
Unified Infrastructure Management (UIM) interface
-
M.2 PCIe M-Key and SATA Gen3 capability
fTPM V2.0
Two serial interfaces (1x RS-232, 1x galvanic isolated RS-485/RS-422)
Operating at 24 V dc (±25%), including over- and under-voltage protection
Reverse polarity protection
Section 1
November 2020
2
Advertisement
Table of Contents
