Μsd Slot; Internal Interfaces; Sata); Internal Devices - Emerson RXi2-BP Hardware Reference Manual

RXi2-BP Hardware Reference Manual
GFK-3187B
6.1.8 µSD Slot
The RXi2-BP provides a µSD card slot with a mechanical lock.
Figure 25: µSD Slot
Signal Name
DATA2
DATA3
CMD
VDD
CLK
VSS
DATA0
DATA1
CD
6.2

Internal Interfaces

6.2.1 M.2 (SATA)
A mass storage M.2 type M-connector (per Spec 3.0 V1.2; June 2019) is located under the system lid
and can only accommodate devices with the SATA interface; no NVMe modules are supported.
Form factors 2042, 2060, and 2080 are supported and 2042 is the default.
If you require to change from form factor 2042 to any other please contact Emerson support for
guidance.
The pinout is specified in the M.2 standard and is not listed in this document.
6.3

Internal Devices

6.3.1

MRAM

The RXi2-BP is capable of Non-Volatile Random Access Memory (MRAM) with 1 Mbit.
MRAM is an optional feature. Contact Emerson for assistance.
Troubleshooting
Pin
1
2
3
4
5
6
7
8
9
Section 6
November 2020
26