Table of Contents
Advertisement
RXi2-BP Hardware Reference Manual
GFK-3187B
4.5
UEFI Firmware Setup
4.5.1
Entering UEFI Firmware Setup
To enter setup during the initial startup sequence: press the Delete or F2 key during the startup
sequence.
Adhere to the applicable on-screen messages when prompted.
To save changes, go to Save & Exit page and choose Save Changes and Exit option
4.5.2
Selective Alternative Boot Source
To select an alternative boot device (for example, boot from USB stick), without changing settings
in UEFI Firmware, please press and hold the F7 key during the power-up sequence
4.5.3
Setting up Boot Priority
To configure a particular boot priority, within UEFI Firmware Setup, navigate to the Boot page and
configure Boot Option #1 and Boot Option #2, as required. Go to Save & Exit page and choose Save
Changes and Exit option.
4.5.4
Restoring UEFI Settings
When within UEFI Firmware Setup, navigate to the Save & Exit page, choose Restore Defaults,
choose Save Changes and Exit.
4.5.5
Configuring Hibernation and Sleep States
When within UEFI Firmware Setup, navigate to the Advanced page, choose ACPI Settings, make
required changes. Go to Save & Exit page and choose Save Changes and Exit option.
4.5.6
UEFI Passwords
To configure Administrator and User passwords, within UEFI Firmware Setup, navigate to Advanced
page, choose Security, make required changes. Go to Save & Exit page and choose Save Changes
and Exit option
4.5.7
Secure Boot Configuration
To configure Secure Boot, change/reset Keys, within UEFI Firmware Setup, navigate to the
Advanced page, choose the Secure Boot option, make required changes. Go to Save & Exit page
and choose Save Changes and Exit option
Note: For in-depth technical information about the CPU and its peripherals, please refer to the
mC10L19 Hardware Reference Manual (GFK-3096).
Installation and Setup
Section 4
November 2020
13
Advertisement
Table of Contents
