Trane 4TXK6512G1000AA Service Manual page 90

8) Installing the air-inlet grille .
Install the air-inlet grille with the steps opposite to that for removing .
For reference
The method for removing angle trim panels when the installation of trim panel is complete:
1)Insert a straight screwdriver in the notchc . Gently turn the screwdriver downward, and slowly insert it in, and then
move it up and down to make the angle fall off .
2)Make the angle C and C fall off in the same way .
3)Take off the angle trim panel by hand .
Straght screwdriver
Angle trim panel
fi
fi
fi
fi
7 2