Trane 4TXK6512G1000AA Service Manual page 121

Wiring connection
Make wiring to supply power to the outdoor unit, so that the power for the indoor unit is supplied by terminals .
4MXD6512G1000AA
4MXD6518G1000AA
4MXD6524G1000AA
4MXD6536G1000AA,4MXD6548G1000AA,4MXD6560G1000AA
7.4 ODU-EN
Selecting installation site
General
 Be sure to provide for adequate measures in order to prevent that the outdoor unit be used as a shelter bye
small animals.
Small animals making contact with electrical parts can cause malfunctions, smoke or fire. Please instruct the
customer to keep the area around the unit clean.
 Select an installation site where the following conditions are satisfied and that meets with your
customer's approval .
 Places which are well-ventilated .
 Pllaces where the unit does not bother next-door neighbours .
 Safe places which can withstand the unit's weight and vibration and where the unit can be installed level .
 Places where there is no possibility of flammable gas or product leak .
 The equipment is not intended for use in a potentially explosive atmosphere .
 Places where servicing space can be well ensured .
 Places where the indoor and outdoor units's piping and wiring lengths come within the allowable ranges .
 Places where water leaking from the unit cannot cause damage to the location (e .g . in case of a blocked drain
pipe)
 Places where the rain can be avoided as much as possible .
 Do not install the unit in places often used as work place . In case of construction works (d .g .grinding works
) where a lot of dust is created, the unit must be covered .
 Do not place any objects or equipment on top of the unit( top plate) .
 Do not climb, sit or stand on top of the unit .
 Be sure that sufficient precautions are taken, in accordance with applicable legislation, in case of
refrigerant leakage .
Caution
9 8