Trane 4TXK6512G1000AA Service Manual page 107

Parts and Fuctions
Installation Procedure
 Please do not install the unit in places where flammable gases may be leaked. ln case that gas is leaked and
accumulated around the unit, it may cause dangers of fire etc.
The indoor unit shall be installed at locations where cold and hot air could evenly
circulated. The following locations should be avoided
 Places with rich saline matters (seaside regions) .
 Places with plenty of gas sulfides (mainly in warm spring areas where the copper tube and braze weld is prone
to corrosion) . Locations with much oil (including mechanical oil) and steam .
 Locations using organic solvents .
 Places where there are machines generating HF electromagnetic waves .
 Positions adjacent to door or window in contact with high-humidity external air . (Easy to generate dew) .
Locations frequently using special aerosols .
Electrical
components Case air outlet
Indoor Unit
Caution
86
air inlet