Warnings - Graco 333013B Instructions - Parts Manual

Warnings

Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-
tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When
these symbols appear in the body of this manual or on warning labels, refer back to these Warnings. Product-specific
hazard symbols and warnings not covered in this section may appear throughout the body of this manual where
applicable.
ELECTRIC SHOCK HAZARD
Improper grounding, setup, or usage of an isolated waterborne system can result in electric shock. To
help prevent electric shock:
• Ground all equipment, personnel, object being sprayed, and conductive objects in or close to spray
area. See Grounding instructions.
• Connect the electrostatic gun to a voltage isolation system that will discharge the system voltage
when not in use.
• All components of the voltage isolation system that are charged to high voltage must be contained
within an isolation enclosure that prevents personnel from making contact with the high voltage
components before the system voltage is discharged.
• Follow the Fluid Voltage Discharge and Grounding Procedure when instructed to discharge the
voltage; before cleaning, flushing, or servicing the system; before approaching the front of the gun;
and before opening the isolation enclosure for the isolated fluid supply.
• Do not enter a high voltage or hazardous area until all high voltage equipment has been
discharged.
• Do not touch the gun nozzle or electrode, or come within 4 in. (102 mm) of the electrode during gun
operation. Follow the Fluid Voltage Discharge and Grounding Procedure.
• Interlock the gun air supply with the voltage isolation system to shut off the air supply anytime the
isolation system enclosure is opened.
• Only use the red-colored Graco electrically conductive air hose with this gun. Do not use black or
gray-colored Graco air hoses.
• Do not splice fluid hoses together. Install only one continuous Graco Waterborne Fluid Hose
between the isolated fluid supply and the spray gun.
4
WARNING
WARNING WARNING WARNING
333013B