Manifold Connections - Graco 333013B Instructions - Parts Manual

Manifold Connections

F . 5 Manifold Connection
IG
A1 Atomization Air Inlet Fitting
Connect a 5/16" in. (8 mm) OD tube between this fitting and the air supply.
A2 Fan Air Inlet Fitting
Connect a 5/16" in. (8 mm) OD tube between this fitting and the air supply.
CYL Cylinder Air Inlet Fitting
Connect a 5/32 in. (4 mm) OD tube between this fitting and the solenoid. For quicker response, use the
shortest hose length possible.
1 Fiber Optic Fitting Transmit (Operational on Smart models only)
Connect the Graco Fiber Optic cable (see page 17).
2 Fiber Optic Fitting Receive (Operational on Smart models only)
Connect the Graco Fiber Optic cable (see page 17).
EXH Exhaust
Connect a 5/16 in OD exhaust tube to route the turbine exhaust air. (3 ft. max length)
TA Turbine Air Inlet Fitting
Connect the Graco Electrically Conductive Air Hose between this fitting (left-hand thread) and the solenoid.
Connect the air hose ground wire to a true earth ground.
333013B
1
2
TA
A2
EXH
CYL
A1
Installation
15