Battery Removal; Cleaning Cautions; Important Safety Instructions - Remington Titanium SCC100 Manual

BATTERY REMOVAL

CLEANING CAUTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR
INJURY TO PERSONS:
070961_REM_IFU_SCC100_INT.indd 5 070961_REM_IFU_SCC100_INT.indd 5
Make sure the clipper is unplugged from any outlets so you don't risk an electrical shock.
With a fl athead screwdriver, gently pry the top cover from the unit, starting with the area
around the pop-out trimmer. This will expose the internal circuitry compartment.
With a Phillips head screwdriver, remove the 3 screws on the circuitry compartment top
cover.
Locate the 6 latches around the perimeter of the circuitry compartment and pry each to
loosen the top cover.
Remove the cover to expose the batteries and circuitry.
Clip the wires connecting the batteries to the circuit board and remove the batteries.
Cleaning should only be done with a soft brush, such as the brush supplied with the
product.
Only use the light-grade oil supplied or sewing machine oil on the blades.
Do not use harsh or corrosive cleaners on the units or their blades. Do not submerge in
water as damage will occur.
Do not wrap the cord of the charging adaptor around the appliance.
STORAGE: Always store this appliance and cord in a moisture-free area. Do not store it
in temperatures exceeding 140° F (60°C).
An appliance should never be left unattended when plugged into a power outlet.
Keep the power plug and cord away from heated surfaces.
Make sure the power plug and cord do not get wet.
Do not unplug the product with wet hands.
Do not use the product with a damaged cord. A replacement can be obtained via our
International Service Centres.
Charge, use and store the product at a temperature between 15°C and 35°C.
Always unplug from the mains when cleaning.
Only use the parts supplied with the appliance.
Keep this product out of reach of children. The use of this appliance by persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge can
give cause to hazards. Persons responsible for their safety should give explicit instructions
or supervise the use of the appliance.
5
10.30.2007 7:47:44 Uhr 10.30.2007 7:47:44 Uhr