Battery Removal - Remington HC905 Manual

The works hair clipper kit
Table of Contents

Advertisement

TO TRIM SIDEBURNS
Select the precision trimmer.
Turn the trimmer on.
Gently guide the cutting unit to your sideburns holding the unit horizontally at a 90
degree angle to the sideburns.
Trim the sideburns moving the trimmer slowly and carefully, to ensure that you do
not accidentally cut hairs that you do not intend to trim.
Note: It is not recommended that you use the trimmer to define or trim the
eyebrows.
TO REMOVE HAIR FROM EAR
Select the nose and ear trimmer.
Insert the cutting unit gently into the outer ear canal opening.
Gently rotate the trimmer in a circular motion.
Avoid inserting the cutting unit more than 6mm into your ear canal.
CARE FOR YOUR TRIMMER
Care for your product to ensure a long lasting performance. We recommend that
you clean your trimmer after each use.
For best results, keep trimmer running while running it under the tap.
Dry off excess water.
Do not submerge in water as damage will occur.
TROUBLESHOOTING
The trimmer is not running but has battery power left:
If the trimmer is not running it may need cleaning; look for and remove any dried
debris from the cutting blades.
AFTER EACH USE
Rinse the accumulated hair from the cutters as noted above. Ensure all debris is
removed from between the blades and shake off excess water.

BATTERY REMOVAL

The battery must be removed from the appliance before it is scrapped.
Rotate the battery compartment cap approximately ¼ turn anti-clockwise then pull
off.
Remove the battery from the battery compartment.
Place the cap back on the unit opposite to how it came off and rotate clockwise
until the cap snaps into place.
The battery is to be disposed of safely.
8

Advertisement

Table of Contents
loading

Table of Contents