Adding A Third-Party Io-Device To A Lan - Emerson PACSystems RX3i User Manual

RSTI-EP PROFINET I/O Controller User Manual
GFK-2571R
3.8

Adding a Third-Party IO-Device to a LAN

To add a third-party IO-Device to a LAN, in the Navigator right-click on the connected
IC695PNC001 module and select Add IO-Device. Select the module in the PROFINET Device
Catalog and click Have GSDML:
Figure 72: Selecting Third-Party Modules for Addition to LAN
To be included in the system configuration, any third-party IO-Device requires a GSDML file.
The GSDML file for the device must be present on the computer being used for the
configuration.
Figure 73: Finding GSDML File for Third-Party Device
Provide a filename path to the file and click OK. The device is added to the configuration.
Machine Edition extracts necessary parameters from the GSDML file and makes the data
available for editing within Machine Edition.
Configuration
Section 3
May 2021
76