Profinet Networks For Pacsystems - Emerson PACSystems RX3i User Manual
Profinet i/o-controller
Hide thumbs
Also See for PACSystems RX3i:
- User manual (232 pages) ,
- Application manual (37 pages) ,
- Manual (37 pages)
Table of Contents
Advertisement
RSTI-EP PROFINET I/O Controller User Manual
GFK-2571R
1.6
PROFINET Networks for PACSystems
PROFINET is an open standard for industrial automation that is based on Industrial Ethernet.
The PROFINET IO framework allows the creation of I/O data exchanges between controllers
and distributed devices. It also allows configuration, parameterization, and diagnostics
communication between controllers and devices.
Note
:
The following products support PROFINET I/O:
Catalog #
IC695CPE400
IC695CPE410
IC695CPE330
IC695CPUxxx
IC695CRUxxx
IC695PNC001
IC695PNS001
IC695PNS101
IC695CEP001
IC200PNS001
IC200PNS002
EPSCPE100/CPE115
EPXPNS001
Introduction
The PROFINET Controller operates only in auto-negotiate mode. All PROFINET bus devices
and switches that are connected to the PROFINET Controller should be configured to use
auto-negotiation.
Product
RX3i Rackless CPU with
embedded PROFINET
Controller
RX3i CPU with embedded
PROFINET Controller
All other RX3i CPUs without
Redundancy
All other RX3i CPUs with
Redundancy
RX3i Rack-Mounted PROFINET
Controller
RX3i Rack-Mounted PROFINET
Scanner
RX3i CEP I/O Drop PROFINET
Scanner
VersaMax PROFINET Scanner
RSTi-EP Standalone CPU with
embedded PROFINET
Controller
RSTi-EP PROFINET Scanner
Notes
LAN2 may be configured as PROFINET
Controller
LAN2 may be configured as PROFINET
Controller
Supports up to 4 PNC001 in its rack
Supports up to 4 PNC001 in its rack
Supports up to 4 PNC001 in its rack
Controls
IO-Devices
on
network
Head-End for RX3i I/O Rack. Exchanges
I/O data and Alarms with PROFINET
Controller. Scans modules installed in its
I/O Rack.
Head-End for RX3i CEP I/O Drop.
Exchanges I/O data and Alarms with
PROFINET Controller. Scans modules
installed in its backplane and expansion
rack.
Head-End
for
VersaMax
Exchanges I/O data and Alarms with
PROFINET Controller. Scans modules
installed in its I/O Rack.
LAN2 may be configured as PROFINET
Controller
Head-End
for
RSTi-EP
Exchanges I/O data and Alarms with
PROFINET Controller. Scans modules
installed in its I/O system.
Section 1
May 2021
PROFINET
I/O
Rack.
I/O
system.
14
Advertisement
Table of Contents
