Configuring Profinet Controller Parameters - Emerson PACSystems RX3i User Manual

RSTI-EP PROFINET I/O Controller User Manual
GFK-2571R
Figure 39: LAN View showing PROFINET Controller on LAN1
3.5.2

Configuring PROFINET Controller Parameters

Configure the PROFINET Controller parameters by editing the tabs as appropriate. The
parameters are divided among the tabs, and the options are available in the Inspector view.
PROFINET Controller Parameters (Settings Tab)
Figure 40: PROFINET Controller Settings Tab (PNC001)
Figure 41: PROFINET Controller Settings Tab (Embedded PNC)
Note that the embedded PROFINET Controller does not have any SFP cages, and therefore
has options for two ports, versus the four ports available in the PNC001.
Configuration
Section 3
May 2021
57