Faults Reported To The Pacsystems I/O Fault Table - Emerson PACSystems RX3i User Manual

RSTI-EP PROFINET I/O Controller User Manual
GFK-2571R
Group-
Error Code
13-h
135-s
140-i
5.9.3

Faults Reported to the PACSystems I/O Fault Table

The following PROFINET Controller related faults are passed to the PACSystems CPU, where
they are reported in the I/O Fault Table of the CPU, in addition to being listed in the Local
Log Table of the PROFINET Controller.
Group/
Category/
Type/
Descriptor
3-2-0-0
10 h – Error code that provides more information about what part of the PNC's hardware experienced a failure.
11 s – Error code that provides more information about what caused a fatal error on the PNC.
12 i – Error code that provides more information about a non-critical error.
Diagnostics
Description
10
PNC001
hardware failure.
11 PNC001 has
encountered a
critical fatal
error.
12 PNC001 has
encountered a
non-critical
error.
Description
Loss of Device
Cause
The PNC001 has
encountered a hardware
related failure.
A critical fatal error has
occurred during normal
PNC001 operation from
which the PNC001
cannot recover.
A non-critical error has
occurred on the PNC001.
Recommended
Cause
Correction
A configured If this is unexpected operation, either re-
PROFINET connect missing PROFINET device on the
device is no network, or remove the device from the
longer present PROFINET Controller's configuration.
on the network.
Note
:
Recommended Correction
Contact customer service.
Contact customer service.
None. This fault is informational.
The network connection issue might
be in the interconnecting network
between the controller and the device,
and not necessarily at the device itself
In an MRP ring with many clients,
storing a configuration that causes all
clients to reconfigure (for example,
changing the Domain Name) may
generate many Loss/Addition of Device
faults. This is expected behavior and
all devices should automatically return
to operational.
Section 5
May 2021
114