Rsti-Ep Standalone Cpu With Embedded Profinet Controller Using Multiple Ports - Emerson PACSystems RX3i User Manual

RSTI-EP PROFINET I/O Controller User Manual
GFK-2571R
Figure 15: RSTi-EP System with embedded PROFINET Controller and one PROFINET
LAN
1.6.11 RSTi-EP Standalone CPU with embedded PROFINET
Controller using multiple ports
The illustration above shows a basic system with one PACSystems RSTi-EP CPU node with
embedded PROFINET Controller controlling one PROFINET network. The network can
connect to 8 compatible IO-Devices, including any combination of Emerson PROFINET
Scanners and third-party IO Devices.
Figure 16 shows one RSTi-EP CPE100/CPE115 embedded PROFINET Controller that is
directly connected to three separate IO Devices in a Star topology. Although each IO Device
is connected to a separate Ethernet port, they are all on the same network segment (IO
LAN1). The IO-Devices in this example are one VersaMax two RSTi-EP PROFINET Scanners,
but RX3i PROFINET Scanners (PNS001, PNS101) and third-party IO-Devices may also be
used.
Introduction
Section 1
May 2021
23