Erase Meters (Set To Zero) - Nortel Meridian 1 Manual

Erase meters (set to zero)

You can use your terminal to set meters in your system to zero. You can do
this for a single DN, a group of consecutive DNs, or all DNs.
— To set the meter for one DN to zero:
SEt MEter dn ZEro <CR>
— To set the meters for a group of consecutive DNs to zero:
SEt MEter dn1 dn2 ZEro <CR>
— To set the meters for all DNs to zero:
SEt MEter ALl ZEro <CR>
— To set the Customer meter to zero:
SEt MEter CUstomer ZEro <CR>
— To add the Customer meter to the end of a command, which sets other
meters to zero:
SEt MEter 1206 ZEro CUstomer ZEro <CR>
Message Registration
Background Terminal Facility
Page 77 of 120
Description