Display Wake-Up Events - Nortel Meridian 1 Manual

Display wake-up events

— To assign a terminal for wake-up display:
SEt OPtion POrt portID WAke DIsplay (ON) <CR>
Wake up events that can be displayed as they happen are listed here.
ENTRY
ANSWER The wake-up call is made, and answered by the guest.
RETURN
— To display wake-up events, the basic command structure is
SEt OPtion DIsplay event(s) (ON) <CR>
— For example, to have a message displayed whenever a call is returned to
the attendant:
SEt OPtion DIsplay REturn (ON) <CR>
— You can choose more than one of these events in the same command. For
example, to display calls entered and calls answered but not calls
returned to the attendant:
SEt OPtion DIsplay ENtry ANswer (ON) <CR>
— To display all three types of events:
SEt OPtion DIsplay WAke (ON) <CR>
— To stop the display of wake-up calls being answered:
SEt OPtion DIsplay ANswer OFf <CR>
Using the Background Terminal
The attendant (or guest) enters or cancels the wake-up
request.
The call is returned to the attendant.
Background Terminal Facility
Page 29 of 120
Description