Using the Background Terminal
Page 35 of 120
Full Automatic list
If your list becomes full because of a temporary command, you will get a
message TRY AGAIN. Simply wait a few minutes and type in your command
again.
If your list already has 12 entries and you try to add another item (number 13),
you will get a message LIST FULL. You must remove an item before you can
add a new one. An automatic cleaning requested procedure (see "Set
automatic control of room cleaning status" on page 63) always uses list entry
12 and will not be shown as a list member. If so, your list is full with
11 entries.
Traffic data
The traffic printout shows system activity for a 24-hour period. It gives
wake-up call statistics and display message statistics.
— To request the traffic printout:
(PRint) TRaffic <CR>
To have it printed at another terminal, replace the word PRint with the port
ID where you want it printed.
Background Terminal Facility
Description