Press [Stop/Reset] To Return To The Standby - Canon imageCLASS MF4150 Advanced Manual

Advanced Fax
1
Features
Checking Job and Machine Status
Advanced Copy
Features 2
System Monitor
3
Reports and Lists
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
System monitor enables you to view and print the
transmission/reception results, check remaining memory,
monitor the status of fax, and check print and scan counts.
■
Checking Print Status
You can check and delete the print jobs sent from a computer.
1.
Press [System Monitor].
2.
Use [ ] or [ ] to select <PRINT
STATUS>, then press [OK].
3.
Use [ ] or [ ] to view the job list.
4.
If you want to delete the print job, press [OK],
then press [ ] to select <YES>.
5.

Press [Stop/Reset] to return to the standby

mode.
■
Checking Print and Scan Counts
1.
Press [System Monitor].
Back Previous
2.
Use [ ] or [ ] to select <VIEW PAGE
TOTALS>, then press [OK].
3.
Use [ ] or [ ] to view the print or scan
counts.
4.
Press [Stop/Reset] to return to the standby
mode.
■
Checking and Deleting Documents
Stored in Memory
1.
Press [System Monitor].
2.
Use [ ] or [ ] to select <TX STATUS>,
then press [OK].
3.
Use [ ] or [ ] to check the desired
document.
4.
If you want to delete the document, press
[OK], then press [ ] to select <YES>.
5.
Press [Stop/Reset] to return to the standby
mode.
TOP
Next
3-2