Switching Temporarily To Tone Dialing - Canon imageCLASS MF4150 Advanced Manual

Advanced Fax
1
Features
Advanced Copy
Features 2
System Monitor
3
Reports and Lists
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
Redialing Automatically
1.
Press [Additional Functions].
2.
Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3.
Use [ ] or [ ] to select <TX SETTINGS>,
then press [OK].
4.
Use [ ] or [ ] to select <AUTO REDIAL>,
then press [OK].
5.
Use [ ] or [ ] to select <ON>, then press
[OK].
6.
Use [ ] or [ ] to select the number of
redials the machine will make, then press
[OK].
Ex.
R E D I A L T I M E S
2 T I M E S
You can also enter values with the numeric keys.
NOTE
Reagrdless of the number you entered, the machine makes only one
redialing attempt if it does not detect a busy signal.
Back Previous
7.
Use [ ] or [ ] to select the time (in
minutes) between redials, then press [OK].
Ex.
R E D I A L I N T E R V A L
2 M I N .
You can also enter values with the numeric keys.
8.
Press [Stop/Reset] to return to the standby
mode.
■

Switching Temporarily to Tone Dialing

If your machine is set for pulse dialing, use the procedure below
to switch to tone dialing to use information services (e.g., banks,
airline reservations, and hotel reservations).
NOTE
To talk to the other party, you will need to connect a telephone to the
machine.
1.
Press [FAX].
2.
Press [Hook].
NOTE
Make sure to confirm the dial tone before entering a fax number.
If you enter the number before the dial tone can be heard, the call
may not be connected, or the wrong number may be dialed.
TOP
Next
1-5