Copying Problems - Canon imageCLASS MF4150 Advanced Manual

Advanced Fax
1
Features

Copying Problems

Advanced Copy
Features 2
Cannot make copies.
System Monitor
3
Reports and Lists
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
Q Have you removed the sealing tape from the
toner cartridge?
A Make sure you remove the sealing tape from the
cartridge. (See "Install Toner Cartridge," in the
Starter Guide.)
Q Is the toner cartridge installed properly?
A Make sure the toner cartridge is installed properly.
(See "Install Toner Cartridge," in the Starter Guide.)
A Make sure the scanning platform and rear cover
are fully closed.
Q Is the document loaded correctly?
A Make sure the document is correctly loaded. (See
Chapter 2, "Document Handling," in the Basic
Guide.)
Back
Q Does the document meet the requirements for
the machine?
A Make sure you load documents that meet the
requirements for use. (See Chapter 2, "Document
Handling," in the Basic Guide.)
The alarm sounds or <MEMORY FULL> appears in the LCD
when making copies.
Q Has an error occurred during transmission or
reception?
A Change to the fax mode and check the LCD for an
error message and solve the problem. (See
Chapter 11, "Troubleshooting," in the Basic Guide.)
Q Is the machine's memory full?
A Check remaining memory. (See "Checking
Remaining Memory," on p. 3-3.)
TOP
Previous Next
5-16