Press [Stop/Reset] To Return To Standby Mode; Reports And Lists - Canon FAXPHONE L120 Advanced Manual

Advanced Fax
1
Features
Checking Job and Machine Status
Status Monitor
2

Reports and Lists

3
Troubleshooting
4
Appendix
5
Table of Contents
Index
Status monitor allows you to view and print transmission
and reception results, print reports and lists, and check
print and scan counts.
■
Checking and Printing Transmission/
Reception Results
1.
Press [Status].
2.
Use [Up/Down] to select <TX/RX RESULT?>,
then press [Set].
If no transmission/reception result is stored in memory, <NONE> is
displayed.
3.
Use [Up/Down] to view the required
transmission/reception result.
The following items are displayed:
– Transaction number (60 down to 01, from the newest to the
oldest)
– Date and time
– Type of transaction (TX or RX)
– Recipient's name or fax number
– Result of transaction (OK or NG)
4.
If required, press [Start] to print the
transmission/reception result.
If you do not need to print the result, press [Stop/Reset] to return to
standby mode.
TOP
Back Previous Next
2-2