Press [Fax; Faxing Problems; Sending Problems - Canon imageCLASS MF4150 Advanced Manual

Advanced Fax
1
Features

Faxing Problems

Advanced Copy
Features 2
■
System Monitor
3
Cannot send a fax.
Reports and Lists
4
Troubleshooting
5
Appendix
6
Table of Contents
Index

Sending Problems

Q Did you just turn on the machine?
A Wait for a while. After turning on the machine, the
machine cannot scan documents immediately.
Q Is the machine set for the correct telephone line
type?
A Make sure the machine is set for the correct
telephone line type. (See "Set the Telephone Line
Type," in the Starter Guide.)
Back Previous
Is your machine in the fax mode?
Q
A Press [FAX] to show the fax standby display.
Q Is the document loaded correctly?
A Make sure the document is correctly loaded. (See
Chapter 2, "Document Handling," in the Basic
Guide.)
A Make sure the scanning platform and rear cover
are fully closed.
Q Is the one-touch speed dialing key or coded
dialing code you entered registered correctly?
A Check that the speed dialing settings are
registered correctly. (See Chapter 4, "Sending
Faxes," in the Basic Guide.)
TOP
Next
5-5