Checking Dialing Line; Dialing An Overseas Number (With Pauses) - Canon imageCLASS MF4150 Advanced Manual

Advanced Fax
1
Features
Advanced Copy
Features 2
System Monitor
3
Reports and Lists
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
3.
Use the numeric keys to dial the required
information service.
4.
When the recorded message of the
information service answers, press [Tone] to
switch to tone dialing.
5.
Use the numeric keys to enter the numbers
requested by the information service.
6.
If you want to receive faxes, press [Start].
When finished, the line is disconnected automatically and the
tone dialing is canceled.
■

Checking Dialing Line

Checking dialing line function enables you to configure the
setting on whether to check for a dial tone.
1.
Press [Additional Functions].
2.
Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3.
Use [ ] or [ ] to select <TX SETTINGS>,
then press [OK].
Back Previous
4.
Use [ ] or [ ] to select <DIALING LINE
CHCK>, then press [OK].
5.
Use [ ] or [ ] to select <ON>, then press
[OK].
6.
Press [Stop/Reset] to return to the standby
mode.
■
Dialing an Overseas Number (With
Pauses)
When you dial or register an overseas number, you may need to
insert a pause within the number.
1.
Set documents.
Place the first page on the platen glass if you are not using the
ADF.
2.
Press [FAX].
3.
Adjust any necessary settings (fax
resolution, etc.) for your documents.
4.
Use the numeric keys to dial the international
access code.
For details on international access codes, contact your local
telephone company.
TOP
Next
1-6