Figure 2-4 Setting The Active Project; Figure 2-5 Changing The Active Project - Fujitsu F2MC-8FX Series User Manual

AN07-00200-03E
As workspace opens, set it as the active project. In this sample program, there are two pre-built
projects "single_operation.prj" and "LIN_communication.prj". Set the project to be built to "Set as
Active Project" as projects are built per project basis. In this section, as single-unit operation is
described, check that "single_operation" is set to the active project, as shown in "Figure 2-4 Setting
the active project".

Figure 2-4 Setting the active project

To set the project for LIN communication as the active project, select the project for LIN
communication and right-click on it, as shown in "Figure 2-5 Changing the active project". The
sub-menu is displayed, so select "Set Active Project". The project name will be displayed in bold,
and the build for that project will be enabled.

Figure 2-5 Changing the active project

38