Figure 1-2 System Connection Diagram (Single-Unit Operation) - Fujitsu F2MC-8FX Series User Manual

The system configuration during LIN communication operations, which are enabled by connecting
the separate bits pot white to "Figure 1-3 System connection diagram (when performing LIN
communication)", which shows the system configuration during single starter kit operations, is
shown in "Figure 1-2 System connection diagram (single-unit operation)".
Note: Prepare the PC by yourself.
Use the USB cable included in the kit for the
connection.
(The power is supplied by the USB bus power.)

Figure 1-2 System connection diagram (single-unit operation)

Connect the PC and starter kit by using the USB cable included in the kit.
The starter kit power is supplied by the USB (USB bus power)
[Note]
Connect the USB to the PC directly. Do not connect the USB via a USB hub or an extension unit
such as a docking station.
17
AN07-00200-03E