Preparation Of The Swb; Creating A New Softune Workbench Project And Workspace And Adjust Workspace Settings; Create Swb Project/Workspace And Select .Abs-File To Be Used - Fujitsu F2MC-8L Series Application Note

Softune Workbench Automatic Debugger Start
Chapter 2 Preparation of the SWB

2 Preparation of the SWB

The steps shown in this chapter show how to setup a dummy Softune Workbench project
together with a corresponding Softune Workbench workspace containing the aforementioned
project. This SWB project/workspace can be used for debugging when for example the tool
chain for building the application software is different from the Softune Workbench.
Of course the steps after creating a new Softune Workbench project/workspace can surely
be applied to an existing Softune Workbench project/workspace if one wants to have the
current Softune Workbench project/workspace to be re-opened automatically at start of the
Softune Workbench (even without automatic start of the debugger).
2.1 Creating a new Softune Workbench Project and Workspace and adjust
Workspace settings
In the following it is assumed that the Softune Workbench (together with necessary drivers if
needed) is already installed.
The directory of the target .abs-file (generated from within a different Softune Workbench
project or generated by another tool chain using the Softune Workbench language tools) is
C:\my_application_project\ABS (choose this path corresponding to your needs). The
name of your application software target .abs file is assumed to be my_application.abs.

2.1.1 Create SWB Project/Workspace and select .abs-file to be used

To create a new SWB project/workspace from scatch use File -> New -> Workspace/Project
file after start-up of the Softune Workbench IDE. This will display the dialog windows as
shown in Figure 1. Fill in the needed information (selection of Chip, Target MCU, Project
Name, Target File Name and Project Directory).
MCU-AN-300097-E-V11 - 6 - © Fujitsu Microelectronics Europe GmbH