Fujitsu F2MC-8FX Series User Manual page 94

Field name
A/D value
(Temperature sensor
information)
3. ID: 0x02
Volume value acquire
byte 0
command
byte 1 A/D value (VR information)
byte 2 Reserved
byte 3 Reserved
byte 4 Reserved
byte 5 Reserved
byte 6 Reserved
byte 7 Reserved
Field name
Volume value acquire
command
A/D value (VR
information)
Set value
0 to 255
Set value
0x55: Start; 0x0F: Stop
0 to 255
94
Remarks
This is the starter kit response to the ID 0x00
temperature measurement command. Temperature
sensor information is sent as A/D values, and displayed
on the bits pot white 7SEG LED.
Remarks
If bits pot white SW4 is set to the right, volume
acquired
information is from the starter kit by
receiving 0x55, and the buzzer sound is output. If bits
pot white SW4 is set to the left, the buzzer sound is not
output.
This is the bits pot white volume information. The
starter kit outputs the buzzer sound according to the
A/D value received.
AN07-00200-03E