Figure 5-8 Entire Lin Communication Control Registers - Fujitsu F2MC-8FX Series User Manual

The registers used for entire LIN communication control on the microcontroller are as described in
"Figure 5-8 Entire LIN communication control registers". Registers named "res" cannot be used as
they are reserved bits.
The description of each register, and the setting values in the sample programs, are described in
"Table 5-1 Description of the entire LIN communication control registers and setting values". For
more information of the registers, refer to the microcontroller hardware manual.
LIN-UART serial control register
bit7
SCR PEN
LIN-UART serial mode register
bit7
SMR MD1
LIN-UART serial status register
bit7
SSR PE
LIN-UART data receiving register / data send register
bit7
RDR/TDR
LIN-UART expanded status control register
bit7
ESCR LBIE
LIN-UART expanded communications control register
bit7
ECCR res
LIN-UART baud rate generator register 1
bit7
‐
BGR1
LIN-UART baud rate generator register 0
bit7
BGR0

Figure 5-8 Entire LIN communication control registers

bit6 bit5 bit4
P SBL CL
bit6 bit5 bit4
MD0 OTO EXT
bit6 bit5 bit4
ORE FRE RDRF
bit6 bit5 bit4
bit6 bit5 bit4
LBD LBL1 LBL0
bit6 bit5 bit4
LBR MS SCDE
bit6 bit5 bit4
bit6 bit5 bit4
89
bit3 bit2 bit1
AD CRE RXE
bit3 bit2 bit1
REST UPCL SCKE
bit3 bit2 bit1
TDRE BDS RIE
bit3 bit2 bit1
bit3 bit2 bit1
SOPE SIOP CCO
bit3 bit2 bit1
SSM res RBI
bit3 bit2 bit1
bit3 bit2 bit1
AN07-00200-03E
bit0
TXE
bit0
SOE
bit0
TIE
bit0
bit0
SCES
bit0
TBI
bit0
bit0