Setting Up The Emulation Software; Software Versions; Set Up A New Project - Fujitsu F2MC-8L Series Getting Started

MB89201 Series – Getting Started
Chapter 4 Setting up the Emulation Software

4 Setting up the Emulation Software

This chapter explains settings in the Softune Workbench and how to start an own application.

4.1 Software Versions

2
The following settings are done in F MC-8L/8FX Family Softune Workbench V30L29.
For working with the emulator you have to install additional DLL-files for the Compact-ICE
Debugger.

4.2 Set up a new project

To set up a new project it is strongly recommended to use the newest 'Template' project for
the MB89201 Series. You will always find this on our web page www.fme.gsdc.de/gsdc.htm.
There are also several example projects.
The 'Template' project includes the startup code, header files and vector table for the
MB89201 series.
Copy the folder 'Template' within the example-folder and rename 'Copy of Template' into
'my_application'.
© Fujitsu Microelectronics Europe GmbH - 11 - MCU-AN-300000-E-V11