7
C H A P T E R S E V E N
Setup Auto Dial
Numbers
Storing Numbers for Easy Dialing
You can set up your MFC to do three types of easy dialing: One Touch,
Speed Dial, and Groups for Broadcasting of faxes.
Storing One Touch Dial Numbers
You can store 24 fax/phone numbers that you can dial by pressing one key
See
One Touch
(and
Dialing
can store names with these numbers. When you press a One Touch dial
p. 76
location, the screen displays the name or number as the call is dialed.
One Touch keys are not the dial pad keys. They are the 12 keys (numbers
01–24) located to the right of the dial pad.
1
2
See
3
Changing
One Touch
and
Speed Dial
Numbers
p. 73
4
). To access numbers 13 to 24, hold down the Shift key. You also
Start
Press
,
,
,
Function
1
6
Press the One Touch key where you want to store a number. (One Touch key
has been pre-programmed for the Brother Fax-Back System (USA
01
only). You can override it if you wish.) The screen displays the location
you selected.
Enter a number (up to 20 digits). If you want to enter a pause in the
dialing sequence (for example, to access an outside line), press
as you're entering digits. Pressing
Redial/Pause
3.5 second pause when the number is dialed, and a dash appears on the
screen.
Press
. The screen prompts you to enter a name for this number.
Set
NAME:
.
1
enters a
Redial/Pause
71