15
C H A P T E R F I F T E E N
Using the
Multi-Function
Link Pro Software
(For MFC 4650, MFC 6650MC and MFC 7750 Only)
Introduction
This chapter outlines the basics of the Brother software, so you can get
started using the Multi-Function Link Pro software. Detailed installation
and setup instructions are in the On-Line Documentation section of the
Brother CD-ROM that is included with your MFC.
Check the online README.WRI file in the
root directory of the CD-ROM for
last-minute important information and
troubleshooting tips that were not included in
the On-Line Documentation.
133