Two-Sided Printing (Manual Duplexing) - Brother MFC-6650MC Owner's Manual

See
If your application software does not support your custom paper size, select
Acceptable
the next larger paper size. Then adjust the print area by changing the right
Paper
and left margins in your application software.
p. 18
When you use labels or transpariencies for overhead projectors, be sure to
use the manual feed slot.

Two-Sided Printing (Manual Duplexing)

See
The supplied printer drivers for Windows
Paper is
NT
Jammed
information, see the Help screen for the printer driver.)
in the
Multi-Purpose
The MFC prints all the even-numbered pages on one side of the paper first.
Sheet Feeder
p. 198
Then, the Windows
paper. Before reinserting the paper, straighten it well, or you may get a paper
jam. Very thin or very thick paper is not recommended. If the paper "double-
feeds" (sends two sheets at once), hold the stack of paper except for the front
sheet while the paper is feeding.
CAUTION
When you use the manual duplex function, it is possible that a paper jam may
occur or the printer quality might not be satisfactory.
®
Workstation Version 4.0 enable manual duplex printing. (For more
®
driver instructs you (with a pop-up message) to reinsert the
U S I N G T H E M F C A S A P R I N T E R
®
3.1, 3.11, 95, 98 and Windows
173