T R O U B L E S H O O T I N G A N D M A I N T E N A N C E
Cleaning the Drum Unit
We recommend you place the drum unit on a drop cloth or large piece of
disposable paper to avoid spilling and scattering toner.
Turn the drum unit upside down carefully.
1
Clean the primary corona wire inside the drum unit by gently sliding the tab
2
from right to left several times.
Return the tab to the home position ( mark position) before
3
reinstalling the drum unit.
Home Position ( )
Tab
CAUTION
If you do not position the tab at the home position, printed pages may have
vertical stripes.
Install the drum unit into the MFC.
4
See the section "Replacing the Drum Unit" on page 221.
Close the top cover.
5
6
Plug in the power cord.
Corona Wire
215