Installing The Brother Software - Brother MFC-6650MC Owner's Manual

U S I N G T H E M F C W I T H Y O U R C O M P U T E R

Installing the Brother Software

Insert the Brother CD-ROM into your CD-ROM drive.
1
Enter the command for your version of Windows
2
After you insert the Brother CD-ROM, you must type the appropriate
command for your version of Windows
• If you are using Windows
Manager: click File, then Run, then type x:SETUP.EXE. ("x" is
the drive letter for your CD-ROM drive.) This will start the
Software Installation program.
• If you are using Windows
Version 4.0, the Software Installation program appears
automatically when you insert the Brother CD-ROM.
®
• For Windows
also click on Start at the Desktop, select Run and then enter
x:\SETUP.EXE
The Brother LOGO will be displayed on the screen.
If you are using Windows NT
will appear on the screen:
You are running Windows NT
support this version of Windows NT
WINDOWS NT 4.0 AND REINSTALL MFL Pro!!
If you are using Windows NT
the Administrator, an error message will appear explaining the problem.
®
:
®
3.1 or 3.11, from the Program
®
95, 98 or Windows NT
®
95, 98 and Windows NT
®
3.51 or earlier, the following error message
®
3.51 or earlier. Brother MFL Pro does not
®
. YOU MUST UPGRADE TO
®
Workstation 4.0 and you are not logged-in as
®
, if needed.
®
Workstation
Workstation Version 4.0, you can
119