128
C H A P T E R T H I R T E E N
Printer Config
Item
Default
Continue Mode
Manual
Parallel
Enable
Bi-directional
Other Config
Item
Default
Auto LF
Off
Auto CR
Off
Auto Wrap
Off
Auto Skip
On
Printer Setup Category
File
Send settings
Load settings
Save settings
Save a command
Load Default
Quit
What This Item Does
Selects Auto or Manual on Auto error
recovery mode.
Selects the bi-directional parallel "Enable"
or "Disable".
What This Item Does
Selects Auto LF "On or Off"
Selects Auto CR "On or Off"
Selects Auto Wrap "On or Off"
Selects Auto Skip "On or Off"
Function
Sends the settings made within the RPC to
your MFC.
Loads the settings you stored in your CD-ROM
or hard disk to the RPC.
Saves the RPC settings to your CD-ROM or
hard disk.
Saves the RPC settings to your CD-ROM or
hard disk as a printer command string.
Loads the default settings to RPC.
Exits