Tray Sensor Holder; Roller Holder - Brother HL-1260 Service Manual

1.20 Tray Sensor Holder

(1) Disengage the DU (Duplex) detection actuator from the hook and slide it to the outside.
(2) Loosen the screw and remove the holder by lifting it from the chassis.
PE sensor actuator tray, PE actuator link, DU detection actuator
1) Remove the PE actuator link from the PE sensor actuator tray.
2) Remove the PE actuator link from the tray sensor holder.
3) Remove the PE sensor actuator tray from the tray sensor holder.
4) Remove the DU detection actuator from the tray sensor holder.
DU detection actuator
PE actuator link
Hook

1.21 Roller Holder

(1) Remove the gear 28.
(2) Loosen and pull out the 2 screws.
Screw
PE sensor actuator tray
Tray sensor holder
Figure 4.32
Roller holder
Gear 28
Figure 4.33
IV - 14
Screws