Printer Disassembling Procedure - Brother HL-1260 Service Manual

PRINTER DISASSEMBLING PROCEDURE

1.2 Toner Cartridge Lid
(1) Remove the toner cartridge lid from the upper cover.
Upper cover assy
1.7 DC Fan Motor
(1) Remove the DC fan motor from the DC fan motor holder by loosening the two screws.
(2) Loosen the screws securing the PCB holder and remove the entire DC fan motor holder.
(3) Remove the fan harness connector from the main PCB assy.
Toner cartridge lid
2 screws
DC fan holder
Screw
Holder spacer
Figure 4.1
Fan connector
Figure 4.2
IV - 2
Open the toner
cartridge lid
DC fan motor
Core