Brother HL-1260 Service Manual page 473

Bar Code, Expanded Character, Line Block Drawing & Box Drawing
n = "s0" or "S0" 3 : 1 (default)
n = "s1" or "S1" 2 : 1
n = "s3" or "S3" 2.5 : 1
This parameter selects the bar code style as above. When the EAN 8,
EAN 13, UPC-A, Code 128 or EAN 128 bar code mode is selected, this
bar code style parameter is ignored.
Expanded Character
"S" 0 = White
1 = Black
2 = Vertical stripes
3 = Horizontal stripes
4 = Cross hatch
eg. "S" n1 n2
n1 = Background fill pattern
n2 = Foreground fill pattern
If "S" is followed by only one parameter, the parameter
is a foreground fill pattern.
Line Block Drawing & Box Drawing
"S" 1 = Black
2 = Vertical stripes
3 = Horizontal stripes
4 = Cross hatch
Bar Code
n = "mnnn" or "Mnnn" (nnn = 0
This parameter specifies the bar code width. The unit of "nnn" is %.
~
32767)
APPENDICES
Appendix–67