Brother HL-1260 Service Manual page 247

5. Hold the tab firmly and pull it out until the sealing tape comes out all the
way.
Fig. 2-12 Pulling Out the Sealing Tape
!
Caution
If the tab breaks from the sealing tape, hold and pull out the tape. If your
hands or clothes get dirty with toner, wipe or wash it off immediately with
cold water.
6. Insert the toner cartridge in the direction of the arrows engraved on the
cartridge into the side guides until it stops securely in the cartridge
holder inside the printer.
Note
Push both sides of the toner cartridge gently until the cartridge is seated in
its place.
Fig. 2-13 Inserting the Toner Cartridge
CHAPTER 2 GETTING STARTED
2–9